|
NC380-SV-ASME
|
100-199
|
|
1
|
Commercial grade heat exchanger: Increased level of efficiency, stabilizing temperature and boosting performance for long life under heavy use.
|
1
|
Steel tank with glass lining and anode rods: The glass lining can be easily broken in transportation or installation. The anode rods harbor scale formation within the tank.
|
|
2
|
Stainless steel venting is durable and high strength and corrosion resistant.
|
2
|
No stainless steel: This can amount to rust and deterioration of the venting.
|
|
3
|
Fully modulating burner: Increased level of efficiency, stabilizing temperature fluctuations and boosting the performance of the flow rate.
|
3
|
Antiquated, inefficient atmospheric burner: does not supply a stable flame to heat the water which creates a long recovery time.
|
|
4
|
Full diagnostics for easy maintenance and repair. Most parts of the heater can be replaced and are plug and play for quick repairs
|
4
|
No or limited diagnostics: The heater cannot be maintained and will give no warning to system failures. Limited parts can be replaced. When the tank breaks, the entire heater must be replaced.
|
|
5
|
Small size: Noritz heaters take up less than 3 square feet of space and can be installed inside or outside on walls or racks.
|
5
|
Large size: The tank heater takes up more than 9 square feet of floor space and can only be installed inside.
|
|
6
|
Stainless steel casing: Allows Noritz units to be cleaned and sanitized and protected from its surroundings. NSF approved.
|
6
|
Steel jacket corrosion can shorten the life of the heater. The large tank heater casing can deteriorate in harsh commercial installation. Not NSF approved for kitchen installation.
|
|
7
|
Endless supply of hot water. Noritz heaters can meet the demand of application and will never run out of hot water.
|
7
|
Limited hot water with long recovery times.
|
